Rs 350 delivery nationwide up to Rs 6,000. FREE delivery on orders above Rs 6,000.
The Blue Puff
OXVAPod kitBESTSELLER
OXVA Xlim Pro 2 Pod Kit

Overview

OXVA Xlim Pro 2 pod kit technical review and performance in Pakistan

The OXVA Xlim Pro 2 represents a major engineering upgrade over the first-generation Xlim Pro, addressing the two primary requests of daily pod users in Pakistan: longer battery life between charges and a brighter daytime-readable display. By fitting a 1300mAh high-density battery cell into the exact same 114.5mm x 25mm footprint (weighing only 67 grams), the Xlim Pro 2 increases battery endurance by 30% over the original 1000mAh model. For Mouth-to-Lung (MTL) vapers running a 0.8 ohm cartridge at 14W with 30mg or 50mg nicotine salts, a single charge comfortably lasts 2 to 3 full days.

Upgraded 0.56-inch Ultra-HD color screen and one-button navigation

Instead of the monochrome OLED panel found on earlier pod kits, the OXVA Xlim Pro 2 integrates a 0.56-inch Ultra-HD color display with twice the pixel density and brightness. The screen clearly shows real-time wattage, coil resistance in ohms, battery percentage (both numerically and via an icon), and a 5-digit puff counter up to 99,999 puffs. Pressing the side button twice brings up a secondary menu that lets you switch between two animated visual themes, change the RGB lighting effect, or reset your puff tracking.

Xlim V3 top-fill mesh cartridges and cross-compatibility

Every OXVA Xlim Pro 2 kit includes two Xlim V3 top-fill mesh pods: a 0.6 ohm cartridge rated for 20W to 25W and a 0.8 ohm cartridge rated for 12W to 16W. The V3 top-fill silicone port allows you to refill your 30ml nic salt bottle without detaching the magnetic pod from the battery chassis. Multi-layer silicone seals and a reinforced cotton wicking base prevent e-liquid seepage even during 42°C summer afternoons in Lahore, Multan, and Karachi. Furthermore, the device remains 100% backward-compatible with all OXVA Xlim V2 side-fill pods, Xlim EZ snap-cap pods, and 0.4 ohm RDL cartridges.

Smart wattage protection and 2A rapid USB-C charging

When you insert a cartridge into the Xlim Pro 2, the onboard Photon chipset immediately reads the coil resistance and locks the maximum wattage ceiling (for example, capping the 0.8 ohm pod at 18W and the 0.6 ohm pod at 25W). This prevents accidental dry hits or burnt cotton if the wattage button is pressed in a pocket. When the battery drops below 20%, the 5V/2A USB-C port replenishes 80% capacity in roughly 25 minutes.

Key features

  • 1300mAh high-density battery delivering up to 4 days of MTL vaping per charge
  • 5W to 30W regulated output with automatic smart coil resistance detection
  • 0.56-inch Ultra-HD color display with 5-digit puff counter and dual UI themes
  • 2A fast USB-C charging reaches 80% battery capacity in 25 minutes
  • Ergonomic side-slider airflow control for tight MTL to loose RDL draws
  • Anti-leak Xlim V3 top-fill cartridge architecture prevents summer condensation

Specifications

Battery
1300 mAh
Capacity
2 ml
Coil
0.6Ω & 0.8Ω Top-Fill Mesh (Compatible with 0.4Ω & 1.2Ω)
Power
5W - 30W Smart Auto-Adjust
Charging
USB-C
Display
0.56-inch Ultra-HD Color Display + RGB Light Bar
Dimensions
114.5mm x 25.0mm x 15.0mm
Chassis Weight
67g (Zinc Alloy + IML / Artificial Leather / Carbon Fiber)
Battery Capacity
1300mAh Built-in High-Density Lithium Polymer
Output Wattage Range
5W to 30W (Smart Mode + Manual Wattage Adjustment)
Pod Capacity
2.0ml Standard Top-Fill (3.0ml XL Cartridges Supported)
Included Cartridges
0.6 ohm (20-25W) Pre-installed + 0.8 ohm (12-16W) Spare
Supported Resistance Range
0.33 ohm to 3.0 ohm (Full Xlim V2, V3 & EZ Series)
Display Screen
0.56-inch Ultra-HD Color Screen (200% Higher Pixel Density)
Charging Specification
USB Type-C 5V/2A Rapid Charge (0 to 80% in 25 mins)
Firing Mechanism
Dual Activation (Responsive Auto-Draw + Side Tactile Button)
Airflow Control
3-Stage Precision Side AFC Slider
Warranty & Verification
7-Day Checking Warranty + Official OXVA Scratch QR Code

What's in the box

  • 1 x OXVA Xlim Pro 2 Device (1300mAh)
  • 1 x OXVA Xlim V3 Top-Fill Cartridge 0.6 ohm (Pre-installed)
  • 1 x OXVA Xlim V3 Top-Fill Cartridge 0.8 ohm (In Box)
  • 1 x USB Type-C Braided Charging Cable
  • 1 x Branded Neck Lanyard
  • 1 x User Manual & Button Operation Quick Guide Card

Flavour notes

E-liquid pairing and flavor accuracy on Xlim V3 mesh coils

The OXVA Xlim V3 mesh heating element delivers pronounced sweetness and crisp cooling, making it a favorite for fruity-ice nic salts like Tokyo Super Cool, OX Passion, Drip Down Edition, and VGOD Mighty Mint. Use the 0.8 ohm pod (14W-16W) with 30mg to 50mg nic salts for a smooth, tight draw, or switch to the 0.6 ohm pod (22W) with 20mg to 35mg salts for denser vapor.

How to use

How to prime, fill, and operate your OXVA Xlim Pro 2

  • Step 1 (Unbox and Remove Insulator): Peel off the protective plastic sticker from the bottom gold contacts of the pre-installed 0.6 ohm pod before attempting to fire or charge the device.
  • Step 2 (Top-Fill Priming): Lift the black silicone plug on the side-top shoulder of the Xlim V3 cartridge. Insert the nozzle of your 30ml nic salt bottle and fill to 80% capacity, leaving a small air pocket at the top.
  • Step 3 (10-Minute Cotton Saturation): Close the silicone stopper firmly and let the pod sit upright for 10 full minutes on its first fill. Taking dry puffs helps draw liquid into the mesh core.
  • Step 4 (Button Shortcuts): Press the side button 5 times rapidly to turn the device ON or OFF. Press 3 times to adjust wattage in 0.5W increments. Press 2 times to change the display theme or RGB light mode. Press 7 times to clear the puff counter.
  • Step 5 (Safe Charging Practice): Use the included USB-C cable with a standard 5V/1A or 5V/2A wall adapter or laptop USB port. Avoid 65W+ mobile super-chargers and unplug the kit once it reaches 100%.

Frequently asked questions

Warranty & authenticity

100% original product sourced from the official distributor. Hardware devices carry a 7-day checking warranty from The Blue Puff. Scratch the holographic authenticity code on the box to verify online with the manufacturer.

Delivery & returns

  • Rs 350 flat delivery anywhere in Pakistan for orders up to Rs 6,000. Free delivery on all orders above Rs 6,000 (COD orders require Rs 350 advance deposit).
  • Lahore: 2 to 3 hours (advance online payment) | 2 working days (COD); 1-3 working days nationwide.
  • Sealed items can be exchanged within 7 days. Opened e-liquids and disposables cannot be returned for hygiene reasons.
Complete the setup

Frequently bought together

Coils, pods and liquids that match this product.

You may also like

Similar products

All Pod Kits & Systems